Rotary Tables
DSP Rotary Table
Hollow rotary table, crossed roller bearing, workpiece mounts directly on the table, hollow centre for wiring and piping. One series: frames 060–450 below are size variants of this series, not six products.
DSP Rotary Table is a rotary table. DSP Planetary is a gearbox. Never order by DSP alone. Frames 060 / 085 / 130 / 200 / 280 / 450 are rows in the tables below — this page replaces the six former per-frame pages.
Frame, torque and axial-load table
| Frame | 1:5 (Nm) | 1:10 (Nm) | 1:18 (Nm) | Axial load |
|---|---|---|---|---|
| DSP060 | 5 | 4 | — | 280 N |
| DSP085 | 30 | 20 | 12 | 500 N |
| DSP130 | — | 52 | 32 | 2,000 N |
| DSP200 | — | 90 | 60 | 4,000 N |
| DSP280 | — | 126 | 100 | 7,500 N |
| DSP450 | — | 456 | — | 15,000 N |
Blank (—) = not listed in the catalogue, never zero. Values vary with ratio; the table is the fit check's source, not a promise for a custom motor pairing.
Accuracy table
| Item | Catalogue value |
|---|---|
| Positioning accuracy | ≤1 arcmin (DSP450: 2 arcmin) |
| Repeatability | ≤15 arcsec (DSP280 / DSP450: 20 arcsec) |
| Parallelism / concentricity | ≤0.01 mm (DSP450: ≤0.02 mm) |
| Table speed | ≤200 r/min (intermittent) |
| Life | 20,000 h (intermittent) |
| Protection | IP40 |
| Motors | Stepping (ST) or AC servo (SV) — see the frame × motor table above; flange and shaft match to be confirmed per order |
| Radial load / hollow-centre diameter / table diameter | — (not listed in the catalogue, never zero) |
| Dimension-sheet status | Catalogue value — check dimension sheet for the frame you order |
Frame × motor table
Motor types in the catalogue for this series are stepping (ST) and AC servo (SV) only — no other motor type is listed. Sizes below are the motor headings of the catalogue dimension drawings per frame. Motor dimension drawings are not separate pages on this site; flange and shaft dimensions for the exact frame you order are dimension-sheet items.
| Frame | Stepping motor | AC servo motor |
|---|---|---|
| DSP060 | 42 stepping motor | 50 / 100 W AC servo motor |
| DSP085 | 57, 42 stepping motor | 200 / 400 W, 50 / 100 W AC servo motor |
| DSP130 | 57 stepping motor | 200 / 400 W AC servo motor |
| DSP200 | 86 stepping motor | 750 W AC servo motor |
| DSP280 | 110 stepping motor | 1,500 W AC servo motor |
| DSP450 | — (not listed in the catalogue, never zero) | 3 kW AC servo motor |
DSP450 has a 3 kW AC servo dimension drawing in the catalogue and no stepping-motor dimension drawing — its stepping cell says “not listed” instead of borrowing another frame's size. DSP085 shows two pairings in the catalogue dimension drawings (57 / 200–400 W and 42 / 50–100 W).
Product visuals
What to state in the inquiry
- Rated torque per planetary model / radial load
- Backlash grade for the exact frame
- Motor flange and shaft match
- Duty cycle (S1 continuous / S5 intermittent)
- Temperature range
- Dust / moisture and IP suitability (IP65 vs IP40)
- Custom flange / shaft or dual-axis dimensions
Compare (up to 3)
DSP Rotary Table
Frames 060–450, IP40.