Applications
Spring coiling machines
Planetary gearboxes + DSP Rotary Table lines, as listed in the catalogue.
Where the parts sit
- ① Planetary gearbox at the axis drive — Reduces motor speed and multiplies torque for the axis; ratio and backlash are checked on the selection page.
- ② Gear rack along the long-travel bed — Converts pinion rotation into long linear travel; module, length and straight vs. helical must be stated in the inquiry.
- ③ Rotary table at the indexing station — Positions and holds the workpiece directly on the table; hollow centre carries wiring and piping. IP40 — do not assume suitability for a wet or food line.
Product lines used
Planetary gearboxes + DSP Rotary Table lines, as listed in the catalogue.
Key parameters
- Rotary output torque across DSP Rotary Table frames: 4 Nm (DSP060 at 1:10) to 456 Nm (DSP450 at 1:10); values vary with ratio — see the torque table.
- Rotary repeatability ≤15 arcsec (DSP280 / DSP450: 20 arcsec).
- Planetary helical backlash B1 typically ≤3–5 arcmin, B2 ≤7–12 arcmin (varies by frame).
Environment limits
- Oil mist and metal dust: suitability of an IP40 rotary table for this environment is to be confirmed by the supplier in writing — do not assume it.
- State duty cycle: S1 continuous vs. S5 intermittent (ED <60%, single run <20 min).
What to state in the inquiry
- Torque and speed, duty cycle, environment (oil mist / dust), motor flange and shaft.
Application case studies
No named case study is published for this application yet. Case studies (machine type + product line + problem solved) are to be supplied with a name attached; none is invented here.