Applications
Printing and paper
Planetary gearboxes + DIN867 gear racks for long-travel print and paper lines.
Where the parts sit
- ① Planetary gearbox at the axis drive — Reduces motor speed and multiplies torque for the axis; ratio and backlash are checked on the selection page.
- ② Gear rack along the long-travel bed — Converts pinion rotation into long linear travel; module, length and straight vs. helical must be stated in the inquiry.
- ③ Rotary table at the indexing station — Positions and holds the workpiece directly on the table; hollow centre carries wiring and piping. IP40 — do not assume suitability for a wet or food line.
Product lines used
Planetary gearboxes + DIN867 gear racks for long-travel print and paper lines.
Key parameters
- Gear racks: modules 1.5–10, lengths 500 / 1,000 / 2,000 mm, DIN 6h25 / 10e27.
- Planetary ratios 3–100, IP65, life 20,000 h.
Environment limits
- Paper dust and continuous running: state duty cycle (S1 continuous is the usual question here) and dust environment in the inquiry; no suitability is claimed on this page.
- Long lines need joined rack lengths stated — joint alignment to be confirmed by the supplier.
What to state in the inquiry
- Total travel, duty cycle, dust environment, module and length.
Application case studies
No named case study is published for this application yet. Case studies (machine type + product line + problem solved) are to be supplied with a name attached; none is invented here.